Tag: manufacturer sprocket

Solution Description

SPROCKET  5/8” X 3/8”  10B Collection SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3					16.0mm
Radius Width C					one.6mm
Tooth Width b1					9.0mm
Tooth Width B1					9.1mm
Tooth Width B2					25.5mm
Tooth Width B3					forty two.1mm
10B Sequence ROLLER CHAINS
Pitch					fifteen.875 mm
Internal Width					9.65 mm
Roller Diameter					ten.16 mm

 

 

Z	de	dp	SIMPLEX			DUPLEX			TRIPLEX
			dm	D1	A	dm	D2	A	dm	D3	A
eight	forty seven.	41.forty eight	twenty five	ten	twenty five	twenty five	twelve	forty	25	12	fifty five
9	fifty two.6	forty six.42	30	ten	25	30	twelve	40	thirty	twelve	55
10	fifty seven.5	51.37	35	ten	twenty five	35	twelve	40	35	twelve	55
eleven	63.	56.34	37	12	thirty	39	fourteen	forty	39	16	55
twelve	sixty eight.	61.34	forty two	twelve	thirty	forty four	fourteen	forty	forty four	sixteen	fifty five
13	seventy three.	sixty six.32	47	twelve	30	forty nine	fourteen	forty	forty nine	16	fifty five
14	seventy eight.	71.34	52	twelve	30	fifty four	fourteen	forty	fifty four	16	fifty five
fifteen	eighty three.	seventy six.36	fifty seven	12	thirty	59	fourteen	40	fifty nine	16	fifty five
16	88.	81.37	sixty	12	thirty	64	16	forty five	sixty four	sixteen	60
seventeen	ninety three.	86.39	sixty	12	thirty	sixty nine	16	forty five	sixty nine	16	sixty
eighteen	ninety eight.3	ninety one.42	70	fourteen	30	seventy four	sixteen	forty five	seventy four	sixteen	sixty
19	103.three	96.45	70	14	thirty	79	16	45	seventy nine	16	60
twenty	108.4	101.49	75	fourteen	thirty	84	16	45	84	16	60
21	113.4	106.52	seventy five	16	30	eighty five	16	forty five	85	20	sixty
22	118.	111.55	80	sixteen	thirty	ninety	sixteen	forty five	90	twenty	sixty
23	123.five	116.58	80	sixteen	thirty	ninety five	sixteen	forty five	ninety five	20	sixty
24	128.three	121.sixty two	eighty	16	30	100	16	forty five	one hundred	20	sixty
twenty five	134.	126.sixty six	eighty	16	30	a hundred and five	sixteen	forty five	one hundred and five	20	60
26	139.	131.70	85	twenty	35	a hundred and ten	20	45	110	20	sixty
27	a hundred and forty four.	136.seventy five	85	20	35	110	20	forty five	one hundred ten	20	60
28	148.7	141.seventy eight	ninety	20	35	one hundred fifteen	20	45	115	20	60
29	153.eight	146.83	ninety	20	35	one hundred fifteen	20	forty five	a hundred and fifteen	twenty	sixty
thirty	158.eight	151.87	90	20	35	a hundred and twenty	20	45	one hundred twenty	twenty	60
31	163.nine	156.ninety two	ninety five	twenty	35	a hundred and twenty	twenty	forty five	a hundred and twenty	20	60
32	168.9	161.ninety five	95	twenty	35	120	20	45	a hundred and twenty	twenty	60
33	174.five	167.00	95	twenty	35	one hundred twenty	twenty	45	one hundred twenty	20	60
34	179.	172.05	95	twenty	35	one hundred twenty	20	forty five	a hundred and twenty	twenty	60
35	184.1	177.10	95	twenty	35	one hundred twenty	20	45	one hundred twenty	20	sixty
36	189.1	182.15	100	20	35	one hundred twenty	twenty	forty five	120	25	60
37	194.2	187.twenty	one hundred	twenty	35	one hundred twenty	20	45	one hundred twenty	25	60
38	199.two	192.24	one hundred	twenty	35	one hundred twenty	20	forty five	a hundred and twenty	twenty five	60
39	204.2	197.29	100	20	35	one hundred twenty	20	forty five	a hundred and twenty	25	60
40	209.3	202.34	one hundred	20	35	one hundred twenty	20	45	120	25	sixty
41	214.8	207.38	*a hundred	20	40	120	20	50	*a hundred thirty	25	sixty
forty two	2,199	212.43	*100	twenty	forty	a hundred and twenty	20	fifty	*one hundred thirty	twenty five	sixty
43	224.9	217.forty eight	*100	20	40	one hundred twenty	twenty	50	*a hundred thirty	twenty five	sixty
forty four	230.	222.53	*a hundred	twenty	40	one hundred twenty	20	fifty	*130	25	60
forty five	235.	227.58	*100	twenty	40	*one hundred twenty	twenty	50	*one hundred thirty	twenty five	sixty
forty six	240.one	232.sixty three	*one hundred	twenty	40	*120	20	fifty	*one hundred thirty	25	sixty
forty seven	245.one	237.68	*a hundred	twenty	40	*one hundred twenty	twenty	50	*a hundred thirty	twenty five	sixty
48	250.2	242.73	*100	20	40	*a hundred and twenty	20	fifty	*one hundred thirty	25	sixty
forty nine	255.2	247.78	*a hundred	twenty	forty	*one hundred twenty	twenty	fifty	*a hundred thirty	twenty five	60
fifty	260.three	252.82	*one hundred	twenty	40	*a hundred and twenty	20	50	*130	twenty five	60
51	265.3	257.87	*a hundred	20	forty	*a hundred and twenty	twenty	fifty	*a hundred thirty	25	sixty
52	270.four	262.92	*one hundred	20	forty	*one hundred twenty	twenty	fifty	*a hundred thirty	twenty five	60
53	275.four	267.97	*100	20	40	*120	twenty	50	*130	twenty five	sixty
54	280.five	273.03	*a hundred	20	40	*120	twenty	50	*130	twenty five	sixty
fifty five	285.five	278.08	*a hundred	twenty	forty	*one hundred twenty	20	fifty	*a hundred thirty	25	60
56	290.six	283.thirteen	*a hundred	twenty	forty	*a hundred and twenty	20	50	*130	25	60
fifty seven	296.	288.18	*one hundred	twenty	forty	*a hundred and twenty	twenty	fifty	*130	twenty five	60
58	300.seven	293.23	*100	20	43	*one hundred twenty	twenty	57	*one hundred thirty	25	sixty four
fifty nine	305.7	298.28	*a hundred	20	43	*a hundred and twenty	20	fifty seven	*130	twenty five	sixty four
60	310.8	303.33	*one hundred	twenty	forty three	*120	twenty	fifty seven	*a hundred thirty	twenty five	64
62	321.four	313.forty three	*a hundred	twenty	43	*a hundred and twenty	twenty	fifty seven	*one hundred thirty	25	64
64	331.5	323.fifty three	*a hundred	twenty	forty three	*120	20	57	*one hundred thirty	25	sixty seven
sixty five	336.5	328.58	*a hundred	20	forty three	*120	20	57	*one hundred thirty	twenty five	67
sixty six	341.six	333.64	*100	twenty	forty three	*120	20	fifty seven	*one hundred thirty	25	67
sixty eight	351.seven	343.seventy four	*100	20	43	*one hundred twenty	20	fifty seven	*a hundred thirty	25	67
70	361.8	353.84	*one hundred	twenty	forty three	*a hundred and twenty	20	fifty seven	*130	25	67
seventy two	371.nine	363.ninety four	*100	twenty	43	*one hundred twenty	twenty	57	*130	25	sixty seven
75	387.1	379.ten	*100	20	forty three	*one hundred twenty	twenty	57	*130	twenty five	67
76	392.one	384.15	*one hundred	twenty	43	*a hundred and twenty	20	fifty seven	*a hundred thirty	25	sixty seven
seventy eight	402.2	394.twenty five	*a hundred	twenty	forty three	*120	20	57	*one hundred thirty	twenty five	67
eighty	412.3	404.36	*100	twenty	forty three	*one hundred thirty	20	fifty seven	*one hundred thirty	twenty five	sixty seven
eighty five	437.six	429.sixty two	*one hundred	20	50	*a hundred thirty	twenty	58	*130	twenty five	sixty seven
ninety	462.8	454.88	*100	twenty	50	*one hundred thirty	20	fifty eight	*one hundred thirty	twenty five	67
ninety five	488.five	480.fourteen	*one hundred	twenty	fifty	*a hundred thirty	20	58	*130	twenty five	sixty seven
one hundred	513.4	505.40	*one hundred	20	fifty	*a hundred thirty	twenty	fifty eight	*one hundred thirty	twenty five	67
a hundred and ten	563.9	555.92	*100	20	50	*a hundred thirty	20	58	*one hundred thirty	twenty five	sixty seven
114	584.1	576.thirteen	*one hundred	twenty	50	*one hundred thirty	twenty	58	*one hundred thirty	25	sixty seven
a hundred and twenty	614.four	606.45	*a hundred	twenty	fifty	*130	twenty	58	*a hundred thirty	twenty five	67
125	639.seven	631.fifty one	*100	twenty	50	*one hundred thirty	20	fifty eight	*a hundred thirty	25	67

Discover: *welding hub

Basic Details.
 

Product name	DIN ISO Normal Sprocket for Roller Chain
Materials Available	one. Stainless Steel: SS304, SS316, and many others
	two. Alloy Metal: C45, 45Mn, 42CrMo, 20CrMo, and so forth
	3. OEM according to your request
Floor Treatment	Heat therapy, Quenching treatment, Large frequency normalizing therapy, Sprucing, Electrophoresis paint processing, Anodic oxidation remedy, and many others
Attribute	Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so on
Design and style criterion	ISO DIN ANSI & Consumer Drawings
Dimensions	Customer Drawings & ISO standard
Application	Industrial transmission products
Bundle	Wooden Circumstance / Container and pallet, or produced-to-purchase
Certificate	ISO9001: 2008
Edge	Quality very first, Services initial, Competitive cost, Quickly delivery
Shipping and delivery Time	twenty days for samples. 45 days for official order.

Installation AND Employing

The chain  spoket, as a generate or deflection for chains, has pockets to maintain the chain backlinks with a D-profile CZPT area with flat aspect surfaces  parallel to the centre plane of the chain back links, and outer surfaces at right angles to the chain link centre airplane. The chain backlinks are pressed firmly in opposition to the outer surfaces and each and every of the facet surfaces by the angled laying surfaces at the foundation of the pockets, and also the assistance surfaces of the wheel physique collectively with the conclude sides of the webs fashioned by the leading and trailing partitions of the pocket.

Recognize

When CZPT new chainwheels it is extremely important that a new chain is equipped at the same time, and vice versa. Using an previous chain with new sprockets, or a new chain with aged sprockets will cause rapid dress in.

It is crucial if you are setting up the chainwheels by yourself to have the factory service handbook particular to your design. Our chainwheels are manufactured to be a direct CZPT for your OEM chainwheels and as this sort of, the installation ought to be carried out according to your types service manual.

During use a chain will stretch (i.e. the pins will dress in causing extension of the chain). Making use of a chain which has been stretched more than the over optimum allowance triggers the chain to journey up the enamel of the sprocket. This brings about injury to the ideas of the chainwheels tooth, as the pressure transmitted by the chain is transmitted totally via the prime of the tooth, rather than the complete tooth. This outcomes in serious wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Requirements companies (such as ANSI and ISO) keep standards for design and style, proportions, and interchangeability of transmission chains. For illustration, the subsequent Desk shows knowledge from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Culture of Mechanical Engineers (ASME). See the references^[8][9][10] for extra info.

ASME/ANSI B29.1-2011 Roller Chain Common SizesSizePitchMaximum Roller DiameterMinimum Supreme Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Common Sizes
Dimensions	Pitch	Greatest Roller Diameter	Minimal Supreme Tensile Strength	Measuring Load
twenty five	.250 in (6.35 mm)	.a hundred thirty in (3.thirty mm)	780 lb (350 kg)	eighteen lb (8.2 kg)
35	.375 in (9.fifty three mm)	.two hundred in (5.08 mm)	one,760 lb (800 kg)	eighteen lb (8.2 kg)
forty one	.500 in (12.70 mm)	.306 in (7.77 mm)	1,500 lb (680 kg)	18 lb (8.2 kg)
forty	.500 in (12.70 mm)	.312 in (7.92 mm)	three,125 lb (1,417 kg)	31 lb (fourteen kg)
fifty	.625 in (fifteen.88 mm)	.400 in (ten.16 mm)	four,880 lb (2,210 kg)	49 lb (22 kg)
sixty	.750 in (19.05 mm)	.469 in (eleven.ninety one mm)	seven,030 lb (3,190 kg)	70 lb (32 kg)
80	1.000 in (twenty five.forty mm)	.625 in (15.88 mm)	twelve,500 lb (5,seven-hundred kg)	125 lb (fifty seven kg)
one hundred	1.250 in (31.seventy five mm)	.750 in (19.05 mm)	19,531 lb (8,859 kg)	195 lb (88 kg)
one hundred twenty	one.500 in (38.ten mm)	.875 in (22.23 mm)	28,one hundred twenty five lb (12,757 kg)	281 lb (127 kg)
140	1.750 in (forty four.forty five mm)	1.000 in (25.40 mm)	38,280 lb (17,360 kg)	383 lb (174 kg)
160	two.000 in (fifty.eighty mm)	1.a hundred twenty five in (28.58 mm)	50,000 lb (23,000 kg)	five hundred lb (230 kg)
one hundred eighty	two.250 in (fifty seven.15 mm)	1.460 in (37.08 mm)	63,280 lb (28,seven-hundred kg)	633 lb (287 kg)
200	2.500 in (sixty three.50 mm)	one.562 in (39.sixty seven mm)	78,a hundred seventy five lb (35,460 kg)	781 lb (354 kg)
240	three.000 in (76.20 mm)	1.875 in (47.sixty three mm)	112,500 lb (51,000 kg)	one,000 lb (450 kg

For mnemonic reasons, below is yet another presentation of essential proportions from the exact same regular, expressed in fractions of an inch (which was element of the considering driving the decision of chosen quantities in the ANSI standard):

Pitch (inches)	Pitch expressed in eighths	ANSI regular chain quantity	Width (inches)
1⁄four	two⁄8	25	one⁄eight
3⁄8	3⁄8	three5	3⁄16
one⁄2	4⁄eight	fourone	1⁄4
1⁄2	4⁄eight	4	five⁄16
5⁄8	five⁄8	5	three⁄eight
3⁄four	6⁄eight	six	1⁄two
1	eight⁄8	8	5⁄8

Notes:
one. The pitch is the length between roller centers. The width is the distance between the hyperlink plates (i.e. somewhat much more than the roller width to let for clearance).
2. The correct-hand digit of the common denotes 0 = typical chain, 1 = light-weight chain, 5 = rollerless bushing chain.
three. The left-hand digit denotes the amount of eighths of an inch that make up the pitch.
4. An “H” pursuing the regular quantity denotes heavyweight chain. A hyphenated variety subsequent the common quantity denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes variety sixty heavyweight triple-strand chain.
 A standard bicycle chain (for derailleur gears) employs slender 1⁄2-inch-pitch chain. The width of the chain is variable, and does not impact the load ability. The much more sprockets at the rear wheel (historically 3-6, presently 7-twelve sprockets), the narrower the chain. Chains are offered in accordance to the amount of speeds they are created to work with, for illustration, “ten speed chain”. Hub gear or one pace bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the highest thickness of a sprocket that can be employed with the chain.

Normally chains with parallel shaped back links have an even variety of back links, with each and every narrow hyperlink followed by a broad 1.Chains built up with a uniform kind of website link, slender at 1 and broad at the other conclude, can be made with an odd quantity of backlinks, which can be an edge to adapt to a special chainwheel-distance on the other aspect such a chain tends to be not so sturdy.

Roller chains created employing ISO normal are sometimes named as isochains.

 

WHY Select US 

one. Reputable High quality Assurance Technique
2. Slicing-Edge Personal computer-Managed CNC Equipment
three. Bespoke Answers from Highly Knowledgeable Professionals
four. Customization and OEM Available for Particular Application
5. In depth Inventory of Spare Components and Components
6. Effectively-Designed Worldwide Marketing Community
7. Effective Soon after-Sale Service System

 

The 219 sets of sophisticated computerized production tools supply ensures for higher solution top quality. The 167 engineers and experts with senior specialist titles can style and produce products to satisfy the precise demands of consumers, and OEM customizations are also available with us. Our sound world-wide provider network can provide customers with timely soon after-sales complex solutions.

We are not just a producer and provider, but also an sector advisor. We perform pro-actively with you to offer you professional suggestions and solution suggestions in purchase to conclude up with a most expense effective merchandise available for your distinct software. The customers we serve worldwide selection from stop end users to distributors and OEMs. Our OEM replacements can be substituted wherever essential and suited for equally fix and new assemblies.

 

 

Technique overall performance is extremely dependent on the conversation of the sprockets, which implies that the sprockets you decide on push the good results of your operation. Make the proper and effortless selection with ep’s sprockets. Tsubaki gives chain and sprocket producing capabilities. The chain meshes well with the sprockets for extended services daily life and reputable overall performance. This implies prolonged-phrase financial savings and real value for your operations. Lessen servicing downtime, enhance productivity and minimize substitute costs
Sprockets are toothed, profiled wheels that mesh with the chain to transmit movement. Our sprockets are custom fabricated substantial-energy aluminum, black anodized for outstanding efficiency. Flat sprockets incorporate ep designs and are compatible with all other components. Blade Sprockets are 6061-T6 Aluminum Hub Sprockets are 7075-T6 Aluminum Tooth Laser Appropriate #25 or #25H Roller Chains Engraved On Every Sprocket Now Effortless To Use With Our Chain Tube Via Pipe